Smooth Surface Filament Wound Fiberglass Pipe , Tapered Carbon Fiber Tubing

Smooth Surface Filament Wound Fiberglass Pipe , Tapered Carbon Fiber Tubing

Filament Wound Fiberglass Pipe features

Good electrical conductivity.
Has excellent corrosion resistance and impact resistance performance.

Surface coating: no (according to requirements)
Surface effect: one-way smooth surface
Supply forms: build
Supply capacity: according to the mould number
Reasonable cooperation advantages: department team support!

Uality guarantee authentic raw materials
Fixed-point logistics guarantee

Filament Wound Fiberglass Pipe Specification

Carbon fiber winding of molding process

The wet winding Wet winding is fiber cluster (yarn belt), glue, directly under tension control winding onto

The mandrel.The advantages of wet winding for:

(1) 40% lower cost than dry winding;

(2) The product has good air tightness, because of the winding tension to squeeze bubbles, the excess

resin adhesive liquid and fill gaps;

(3) Fiber arrangement good parallelism;

(4) The wet winding, fiber resin adhesive solution, can reduce the fiber abrasion

High efficiency (up to 200 m/min).Wet winding faults as follows:

(1) Resin waste is big, poor operating environment;

(2) Gel content and quality of the finished product is not easy to control;

(3) Less available for wet winding resin varieties.

Filament Wound Fiberglass Pipe advantages

(1) Can be according to the stress of the product design winding, can give full play to the strength of the

fiber;

(2) Than high strength: generally speaking, a filament wound pressure vessels with volume,

compared with pressure of steel container, the weight can reduce 40 ~ 60%;

(3) High reliability: filament

winding is easy to realize mechanization and automation of production, process condition is

determined

put out the product quality is stable and accurate